Description
Bulkhead Install:
- 1-3/8″ to 1-1/2″ Hole Size
- The O-ring / Gasket should be on the OUTSIDE of the tank. Make sure there are no burrs on that side of the hole
- The bulkhead is a self tightening nut, so it threads counter-clockwise. Once hand tight, finish tightening with a couple adjustable straight jaw pliers.
- If you’re installing on a Brute can, stay clear from the mold seam found at the bottom of the can. Be sure the surface is completely flat where the bulkheads gasket is going to go
