5800 Series – Demand Delivery Pump (70PSI / 0.63GPM)

The 5800 Series pumps are typically used to either:

A) Draw water from a holding tank and pressurize it

B) Boost pressure from a low pressure source.

The 5800 is controlled by a built-in pressure sensing demand switch. When a faucet, hose, or valve is open downstream of the pump, the line pressure drops and the pump automatically starts, conversely, when the hose or valve closes, the line pressure will increase, turning the pump off automatically. Although designed to operate intermittently, most models can run continuously for several hours at a time. 

The pump comes with 3/8” John Guest built-in fittings on the inlet and outlet port and operates at 70PSI and 0.63GPM 

Made in USA!